undefined

CONSTRUCTION: Easy cleaning, corrosion resistant stainless steel finish, welded with angle iron and aluminized inner framing. Sturdy 4ʺ heavy duty stainless pipe legs with adjustable feet. 4ʺ wide stainless steel bull-nose landing across the front is a functional work area for service plates and work utensils as well as control protection. Double wall construction with heavy insulation for cooler operation. Installation clearances for non-combustible surfaces are 0" on the sides and 0" in the rear, combustible surfaces are 4" on the sides and 5" in the rear. GRIDDLE PLATE: Highly polished to minimize food sticking. 3/4ʺ thick plate is standard, 1ʺ thick is available. 4ʺ high splash guard is standard. 21-1/4ʺ deep cooking surface with front, cold zone grease trough. Grease drain slot is 3.5ʺ x 1ʺ and feeds into a seamless, deep, removable grease drawer. CONTROLS: Manual control griddles feature brass gas valves & thermostat models feature precise temperature controls brass gas valves, automatic standing pilots are standard. Pressure regulators are set at the factory for the gas specified. Optimal pressures are 4ʺ WC for natural gas and 10ʺ WC for propane. Manifold size is 3/4ʺ NPT. All controls are tested and confirmed in good working order. Calibration and adjustments are the responsibility of the installer. BURNERS: 12ʺ incremental griddles feature 20,000 BTU cast iron “H” pattern burners, one for each 12ʺ increment. 18ʺ & 30 ʺ models feature 2 and 4 straight burners respectively, each rated at 18,000 BTU. MATCH-UP: FHP Series griddles are designed to match up with FHP char-broilers and hot plates. ACCESSORIES: tall or short splash guards, safety pilot controls, chrome plating, grooves, gas hoses, grill scrapers, spatulas, cleaning supplies, carrying handles, knob protectors and matching equipment stands.

Welded frame griddles, Made in USA, 21.25ʺ deep x 3/4ʺ thick plate, manual & thermostat control, insulated double wall, SS finish.