Potato Pancake Griddle, countertop, gas, 27-1/2" deep frame, 36" wide x 24" deep fry surface, 1/2" thick plate bottom, 2-1/2" splash guard all the way around, (2) thermostat controls, 75,000 total BTU, stainless steel exterior finish, NSF
Long description:
CONSTRUCTION: Easy cleaning, corrosion resistant stainless steel. Welded frame with insulated side panels. Stainless steel front control panel. 4 inch wide stainless steel bull nose landing
across the front for control protection Installation clearances for
non-combustible surfaces are 0 inches on the sides and 0 inches in the rear,
combustible surfaces are 6 inches on the sides and 6 inches in the rear.
CONTROLS: Equipped with brass gas valves and automatic standing pilots. Pressure regulators are set at the factory for the type of gas specified. Optimal pressures are 4? inches WC for natural gas & 10inches WC for propane. Throttling thermostat controls are available, adjusting from 150F to 450F to
provide accurate temperature control to +/- 20F of set point. Manifold size is ¾" NPT. All controls are tested and
confirmed in good working order. Installation, calibration and adjustments are the responsibility of the buyer.
BURNERS: 12 inch incremental griddles feature 25,000 BTU
burners, one for each 12 inch increment. 30" & 42" models feature
4 & 6 burners respectively, each rated at 16,000 BTU.
Short description:
Potato pancake griddles, manual or thermo control, splash guards on 4 sides, no grease drain - shallow frying